How to operate the tubular stock machine? What should I pay attention to when operating?
Release time:
2021-04-14
Rope is an indispensable thing in people's life. The development of tube type rope closing machine brings great convenience to people's life, reduces the process from rope making to rope making, does not produce waste silk or waste, and makes the rope more beautiful and durable. So how to operate the tube joint stock machine? The following is a brief introduction.
Ropes are essential to people's lives,Pipe type rope closing machineThe development of brings great convenience to people's life, reduces the process from rope making to rope making, does not produce waste silk or waste, and makes the rope more beautiful and durable. So the tube stranding machineHow to operate it? The following small series will introduce to you.
1. Place it on a level ground, connect the power supply, check whether each gearbox is normal, and properly lubricate each gearbox part. Start the motor to see if the running direction is consistent with the indicated direction. If they do not agree, turn off the power and swap the two wires of the capacitor and the motor to match the indicated direction.
2. Take an appropriate amount of prepared straw and insert itPipe type rope closing machineand then make it through the rope mouth into between the two rope wheels.
3. After turning on the power, continuously input straw after the original forage to complete the production.
4. When the rope roll is full, turn off the power of the tubular rope closing machine, cut the straw rope near the wooden reel, take out the wooden reel, and then remove the straw rope bundle. After the rope reel is installed, the original rope end is wrapped to copy it on the board.
UsePipe type rope closing machineNote:
1. Tubular joint stock machineOperated and maintained by a dedicated person. The operator should carefully read the instruction manual and be familiar with its performance and precautions before working.
2. Adjust the height of the worktable and pressure roller according to the thickness and cutting amount of the workpiece to be processed.
3. Observe the working conditions every time you start the machine, and pay attention to stop the vacuum work after the work stops.
4. In order to facilitate maintenance and adjustment and improve work efficiency, this machine has two working states: manual and automatic.
5. Regular lubrication and maintenance according to certain requirementsPipe type rope closing machineMachine tools.
TAG：
Recommend News
HEXING CABLE MACHINERY
TEL: +86-317-3601666, +86-317-3236119
FAX: +86-317-3618408
E-MAIL: china@hbhxdg.cn
E-MAIL: hbhxdg@gmail.com
WEB: http://www.hbhxdg.cn
ADD: Baoantun Industrial Zone, Hejian City, Hebei Province