Steel belt armored machine is how to work?
Release time:
2021-09-30
The steel tape armoring machine is an application equipment for wire and cable factory managers, power cables, and stress cable control cables. Modified materials include copper strip, steel strip, aluminum strip, etc. There are many models of steel tape armoring machines. When installing the steel tape armoring machine, it must be noted that the cable pile driver is used in conjunction with other equipment, and the installation location is determined by the user. When installing the steel belt armoring machine, cement mortar shall be poured after leveling of the embedded angle screws, and the empty machine shall be started for trial operation after solidification during pouring.
The steel tape armoring machine is an application equipment for wire and cable factory managers, power cables, and stress cable control cables. Modified materials include copper strip, steel strip, aluminum strip, etc. There are many models of steel tape armoring machines. When installing the steel tape armoring machine, it must be noted that the cable pile driver is used in conjunction with other equipment, and the installation location is determined by the user. When installing the steel belt armoring machine, cement mortar shall be poured after leveling of the embedded angle screws, and the empty machine shall be started for trial operation after solidification during pouring.
The wiring of the steel tape armoring machine speed meter shall be operated by an electrician. Before starting the machine, install the required steel or copper strips and lock the nuts. When starting, loosen the continuously variable speed adjustment handle. If the speed regulating motor is not easy to start when the position is adjusted, special attention should be paid to this operation method. Use the speed regulating motor to rotate slowly, and then adjust the continuously variable speed knob to make it compatible with the modified cable.
The steel tape armoring machine tugboat adopts a new type of wear-resistant alloy material, which greatly improves the wear resistance compared with the traditional phenolic laminated tugboat. The traction device adopts natural parting line, which avoids the wear and extrusion damage between the cable and the traction wheel, and can realize single and double steel wire armor. The diameter of the armored cable is 120, the diameter of a single steel wire is 0, the scope of application is wider, the main winch speed is high, the exit speed is fast, and the production efficiency is high. The steel wire armoring machine is mainly used for steel wire armoring of various cables and optical cables.
Before using the equipment of the steel tape armoring machine, carefully check whether each protective cover and gutter cover of the equipment are very firm. Also carefully check whether the fasteners that need to run at high speed, such as steel heads, are installed firmly. After confirming that all events are within a safe range, the steel tape armoring machine can be started.
TAG：
Previous Page:
Recommend News
HEXING CABLE MACHINERY
TEL: +86-317-3601666, +86-317-3236119
FAX: +86-317-3618408
E-MAIL: china@hbhxdg.cn
E-MAIL: hbhxdg@gmail.com
WEB: http://www.hbhxdg.cn
ADD: Baoantun Industrial Zone, Hejian City, Hebei Province